Key data:
- Measuring / purge and continuous output stage to control one HDEV6 injector
- Parameterization via serial LVDS high-speed interface (via HDEV6 controller PN2350)
- Up to 5 multiple injections and max. 4 multiboosterings possible
- Current values switch controlled
- Adjustable number of triggers (pulse preselection)
- Definition of monitoring / shutdown criteria
- Display of last current and voltage profile via VSGControl2 software
- Detection of injector faults:
- Interruption
- Short circuit
- Ground fault
- Winding fault
- Detection of hardware defects
- Fuse defective
- Sense lines interrupted
- Overtemperature protected power stage
Further information can be found in the manual of the module
(Download only possible after user registration).
Key data:
- Measuring output stage for driving up to 2 high-impedance injectors (10...20Ohm)
- Two independently controllable output stages
- Trigger pulse can be configured separately for each output stage by means of a jumper. Thus control with LOW or HIGH active trigger pulse possible.
- Lengthening or shortening of the trigger pulse adjustable
- Current monitoring can be deactivated via jumper
- Suitable for UBmin measurements
- Control of injector according to circuit no. 1 289 917 057 of Robert-Bosch GmbH (PN2088 | PMH)
- Control of the injector according to circuit no. 1 289 917 094 of Robert-Bosch GmbH (PN2088-01 | CH1)
- Control of the injector according to circuit no. 1 289 917 156 of Robert-Bosch GmbH (PN2088-02 | MB1)
Further information can be found in the manual of the module
(Download only possible after user registration).
Key data:
- Measuring output stage for driving up to 2 high-impedance injectors (10...20Ohm)
- Two independently controllable output stages
- Trigger pulse can be configured separately for each output stage by means of a jumper. Thus control with LOW or HIGH active trigger pulse possible
- Lengthening or shortening of the trigger pulse adjustable
- Current monitoring can be deactivated via jumper
- Suitable for UBmin measurements
- Control of injector according to circuit no. 1 289 918 753 of Robert-Bosch GmbH (PN2208 | LE)
- Control of the injector according to circuit no. 1 289 918 756 of Robert-Bosch GmbH (PN2208-01 | DE1)
- Control of the injector according to circuit no. 1 289 917 716 of Robert-Bosch GmbH (PN2208-02 | FE1)
Further information can be found in the manual of the module
(Download only possible after user registration).
Eckdaten:
- Measuring output stage for driving up to 2 high-impedance injectors (10...20Ohm)
- Two independently controllable output stages
- Trigger pulse can be configured separately for each output stage by means of a jumper. Thus control with LOW or HIGH active trigger pulse possible.
- Lengthening or shortening of the trigger pulse adjustable
- Current monitoring can be deactivated via jumper
- Suitable for UBmin measurements
- Control of the injector according to circuit no. 1 289 918 801 of Robert-Bosch GmbH
Further information can be found in the manual of the module
(Download only possible after user registration).
Common Rail Driver stage CREST-7 PN2236-07